You could find yourself with the steering wheel locked for no apparent reason as you prepare to take the wheel of your Chevrolet HHR. This sometimes happens, and in most situations it is not very serious. However, be sure to follow the steps we will speak about with you in order to find the option as simply and quickly as possible.
Before solving the question, we will first remind you how the starter mechanism works.
How the steering wheel of my Chevrolet HHR works
First, the starter switch consists of two components.
- The cylinder of the lock in which you insert the key to turn it
- The electronic switch behind it. It will provide the electrical impulse to start your Chevrolet HHR’s engine from the moment you turn the key.
When should it be changed?
Three cases may explain the need to change the switch on your Chevrolet HHR:
- The switch on your steering wheel was damaged or forced, in most cases because someone tried to steal your car.
- The switch suddenly failed and no longer works at all.
- The switch on your Chevrolet HHR shows signs of weakness, there is a little delay between the time the engine starts or you have to press the key very hard.
Check properly your steering wheel with your Chevrolet HHR’s manual to see if the switch is made of one piece or if the two elements (lock cylinder and switch) are distinct. Indeed, it is possible to replace only the out-of-service element, which is more economical. You will have to spend about a hundred euros if you work with a garage, between 20 and 50 € if you change it yourself.
Now to the facts:
How do I unlock the steering wheel of my Chevrolet HHR?
On a car, locking the steering wheel when stationary is a safety feature against theft. The steering wheel can only be unlocked by inserting the corresponding key into the vehicle.
Insert the key into the switch. Your steering wheel has probably been locked since the last time you removed the key from the switch.
To unlock the steering wheel, just turn the key to the right and you can start the engine of your Chevrolet HHR. Try without forcing, in mechanics, it is never good to force so act gently on the steering wheel and the key until you find the unlocking point.
Move the steering wheel, if your key is locked, turn the steering wheel in the direction it wants to move and your key will therefore turn. Be careful, you must be more or less coordinated when you turn the steering wheel and the key of your Chevrolet HHR.
Do not move the steering wheel too hard. If you force too hard, you may ruin the switch pinions, which will completely block the steering wheel on your Chevrolet HHR. If this still doesn’t work, try to remove the key just a little. The plan is to find a position that would facilitate it to turn. Try one or two millimetres less depressed.
If you can start, your key is worn out. It would consequently be wise to change it quickly.
It is also possible that your switch may be seized. In the event of a blockage, it may necessitate a little specific anti-seize agent. Send one or two splashes into the slot of your Chevrolet HHR’s switch and then try to insert the key again. Play it gently to apply product all over it.
Also, just check that your key is not damaged or blunt; if the teeth are no longer as they were in the beginning, they will no longer be able to move the pinions of the cylinder on your Chevrolet HHR’s steering wheel.
If the problem comes from your key, remember to take your duplicate in order to make another copy and thus have two keys that are in working order for your Chevrolet HHR.
Conclusion on my Chevrolet HHR :
As you have read earlier, the main motives for a steering wheel lock are a damaged key or a jammed cylinder. In automotive mechanics, the majority of breakdowns or malfunctions are due to units that are poorly or not taken care of. Keep them in good condition by simply cleaning them regularly and also by taking care of them to optimize their life span.To discover more tips on the Chevrolet HHR, take a look at the Chevrolet HHR category.