If the oil light on your Genesis G80 lights up, it is best to be concerned. It suggests a potential failure that could affect your Genesis G80 or even put you in danger so be careful and very responsive.
In this article, we want to try to provide you with an answer so that you can understand the ins and outs of this sight and thus correct the situation.


What does the oil sight glass look like on your Genesis G80?

To begin with, it is important to recognize this indicator on your Genesis G80. It is red in colour and shows a small burette with a drop on the right. Like all red lights, this means that you must stop your Genesis G80 as soon as possible. To make sure it works, you will see it turn on when you turn the ignition. If it does not light up, your indicator light is defective.
Do not mix up this light with the nearly identical yellow one. This one indicates that you are probably short of oil.

What is the purpose of the oil indicator light that lights up on your Genesis G80?

Now, we want to explain to you what it is for and why it is very important. Unlike what we may think, it has nothing to do with the oil level in your Genesis G80. What is more, it is there to report a loss of pressure in this engine oil, which can quickly damage or even destroy your Genesis G80’s engine. That’s why as soon as it appears on your vehicle, you must stop the car.
then, we will explain to you what this oil is intended for in your Genesis G80’s engine. It works with a set of metal parts, which are regularly in contact and therefore need replacing. The oil under pressure consequently ensures the lubrication of these parts to stop them from being damaged. Otherwise, it also serves to cool them down due to the fact that they heat up quickly when you drive your Genesis G80. Finally, the oil also cleans and circulates dirt that could damage your engine.
You must consequently ensure that the engine oil pressure is always conserved at its recommended level for your Genesis G80. This represents 1 bar at standstill and about 5 bars at high speed. In a logical way, when the pressure does not reach 1 bar, a sensor should indicate it by lighting the warning light that should alert you.

Faults that trigger the ignition of the oil sight glass on your Genesis G80:

Three factors could lead to the ignition of this light. First, the most likely, if the oil pump is defective. It no longer fulfils its function of preserving oil pressure in the engine. If this is the case, we recommend that you go to a garage because only a professional can make an appropriate diagnosis on your Genesis G80.
Secondly, if you run out of oil, the pressure could drop. Same effect with low pressure, the red LED lights up. So what you have to do is put more oil. The last, rarer case is a defective pressure sensor that can no more detect the pressure correctly and therefore delivers incorrect information. In this case, it is also necessary to call upon a professional for your Genesis G80 as he will have the pressure control device and will be able to tell you exactly what it is.

Conclusion :

So now you know what this light is for and what the related failures are on your Genesis G80. Once again, be extremely vigilant when a red light turns on as they represent a real immediate danger to your Genesis G80 and especially to passengers.

To find more tips on the Genesis G80, take a look at the Genesis G80 category.