A horn that no longer works is likely to become unsafe and must be repaired as soon as possible. You should certainly always, on your Dodge Journey, be able to report your presence thanks to this vital device. It may simply be broken and have a peculiar sound on your Dodge Journey, but nevertheless it is a problem that you must end. The objective of this article is to go along with you step by step in this process because you will realise that you can do it yourself without going to the garage for your Dodge Journey.
First, start by examining where the failure came from. Based on this you will find out what repairs to do.
We will help you step by step through the different tests:

horn-not-workingdodge-journey

Try honking the horn with the cover open. If you hear a sound, but much weaker than usual, it means that some tubes are impaired but some still work. actually, on your Dodge Journey there are several trumpets that carry sound.
Step two, try to track down the horn. You will find it nearby the radiator at the front of your car, near the grille. The grille is the small grille at the front of vehicles that makes it possible for air to enter while protecting the parts of your Dodge Journey.

Horn cables unplugged on my Dodge Journey

Once the horn is identified, we will try to disconnect and reconnect the connecting wires in order to perform a new test. To do this, take the two connected wires, pull them out by their ends towards you. There should also be a horn fixing bolt that you need to unscrew. Then clean it all up with a brush or something, then reconnect it all. Try honking your horn again. Does it work?
You have found the solution for your Dodge Journey! If nothing changes, let’s go a little further in the tests and explanations.
You are faced with several solutions at this stage.

Faulty horn horn on my Dodge Journey

You may well buy another tube to replace the defective ones if you have been able to identify them on your Dodge Journey thanks to the noise.

Fuse blown

you should also check the fuses. To find this fuse box, we invite you to visit our previous article on the subject:
“Where to find the fuse box on a Dodge Journey”
You should also take a look in your vehicle owner’s manual for the fuse references of the horn fuse that you must identify precisely.
Once the fuse is identified, you can dispose of it using a pair of pliers. To find out if it is burned, look at the metal part. If this one is blown, your fuse has blown on your Dodge Journey. It must therefore be replaced. If it looks new, it should not be questioned.
You can come across this fuse in any car shop or garage. Test the horn again after the fuse has been exchanged. Is your horn working again? Congratulations! If this still doesn’t work for your Dodge Journey, check your dashboard and especially your airbag indicator light. If this one is on, there may be a link. Actually, it can have an impact on the rotating switch, a part that acts as a relay between the steering wheel and the horn. Nevertheless, for an airbag indicator problem on your Dodge Journey, it is wise to go to a professional as it is more complicated to manage alone.

Conclusion

Here are the different causes that could have an impact on your Dodge Journey’s horn. Trumpets, fuses, rotating switch, airbag. Precisely determining the fault will help you to remedy it. Be cautious to replace the fuse with an identical fuse of the same intensity.

In the event that you have any further questions about the Dodge Journey, do not hesitate to consult our Dodge Journey category.