A horn that no longer functions could easily become unsafe and must be repaired as soon as possible. You must always, on your Dodge Dart, be able to report your presence thanks to this vital device. It may simply be broken and have a peculiar sound on your Dodge Dart, but nevertheless it is a problem that you must end. The objective of this article is to accompany you step by step in this technique because you will come to the conclusion that you can do it yourself without going to the garage for your Dodge Dart.
First, start by examining where the failure came from. Based on this you will know what repairs to do.
We will help you step by step through the different tests:

horn-not-workingdodge-dart

Try honking the horn with the cover open. If you hear a sound, but much less strong than usual, it means that some tubes are damaged but some still work. in fact, on your Dodge Dart there are several trumpets that carry sound.
Next step, try to locate the horn. You will find it nearby the radiator at the front of your car, near the grille. The grille is the small grille at the front of vehicles that allows air to enter while protecting the parts of your Dodge Dart.

Horn cables unplugged on my Dodge Dart

Once the horn is identified, we will try to disconnect and reconnect the connecting wires in order to perform a new test. To do this, take the two connected wires, pull them out by their ends towards you. There should also be a horn fixing bolt that you have to unscrew. Then tidy it all up with a brush or something, then reconnect it all. Try honking your horn again. Does it work?
You have found the solution for your Dodge Dart! If nothing changes, let’s go a little further in the tests and explanations.
You are confronted with several solutions at this stage.

Faulty horn horn on my Dodge Dart

You may well buy another tube to change the defective ones if you have been able to identify them on your Dodge Dart thanks to the noise.

Fuse blown

you might want to also check the fuses. To find this fuse box, we invite you to look at our previous article on the subject:
“Where to find the fuse box on a Dodge Dart”
You should also take a look in your vehicle owner’s manual for the fuse references of the horn fuse that you must identify precisely.
Once the fuse is identified, you can remove it using a pair of pliers. To verify if it is burned, have a look at the metal part. If this one is blown, your fuse has blown on your Dodge Dart. It must therefore be replaced. If it looks new, it should not be questioned.
You can come across this fuse in any car shop or garage. Test the horn again after the fuse has been replaced. Is your horn working again? Congratulations! If this still doesn’t work for your Dodge Dart, examine your dashboard and specifically your airbag indicator light. If this one is on, there may be a link. Actually, it can have an influence on the rotating switch, a part that acts as a relay between the steering wheel and the horn. However, for an airbag indicator problem on your Dodge Dart, it is wise to go to a professional as it is more challenging to manage alone.

Conclusion

Here are the different causes that could have an impact on your Dodge Dart’s horn. Trumpets, fuses, rotating switch, airbag. Precisely determining the fault will help you to remedy it. Be vigilant to replace the fuse with an identical fuse of the same intensity.

To discover more tips on the Dodge Dart, take a look at the Dodge Dart category.