You have found yourself several times stalling with your Ford Escape when you try to start the car and you don’t know why. Even if your car starts after several tests, it is important to look into the problem so as to solve the breakdown as soon as possible, in order to avoid a more serious problem.
The objective of this article is to help you see things more clearly and try to understand what might cause trouble. We will talk about the various likely breakdowns you may encounter so that you can solve them easily and avoid more problems on your Ford Escape.


Reasons for stalling at start-up

We will structure this article into two separate paragraphs, one dealing with mechanical causes, and the other with electronic causes.

1: Mechanical origins on your Ford Escape that makes you stall

In this section, we will see the different parts that could cause you to stall at start-up if they are broken.
The idle actuator: The purpose of the idle actuator is to control the air in the engine when it is idling so that it does not choke or stall. If you ever think that your engine is slightly browsing before stalling, it is very likely that the idle actuator is concerned.
Battery: If your car starts normally and then stalls a little later, it’s nothing to do with the battery. It will be concerned if your Ford Escape starts to stall immediately after switching it on.
In that case, check the battery carefully.
Also, simply look at your dashboard to get information thanks to the the lights that may be on.
Also, keep in mind to manually check the cleanliness of the parts of your Ford Escape. Indeed, a thorough cleaning of the parts (filters, injection pump, pressure regulator) could help you out of situations that would have seemed much more delicate, and avoid your Ford Escape to stall. This is often the cause of other various breakdowns.

2: Electronic origins on your Ford Escape

We will take a look at here the potential electronic failures that could cause you problems, but in general the causes are very often, as we have mentioned, of mechanical origin.
BSM box: This is the information exchange platform of your Ford Escape. It is improbable that this is the case because ithe BSM box is rather reliable. The large part of breakdowns related to this box are cars that stall while driving.
BSI box: The BSI box allows to focus the information and to translate all these different languages for the global management of the vehicle functions. This could be the motive not if your Ford Escape stalls at start up, but if your Ford Escape does not start at all.
Calculator: This is the central element of a system called an “embedded system”. The primary function of an ECU is to send out the right “weight” of fuel with each engine piston stroke. Several embedded systems electronically manage the various functions of the vehicle. There are between 30 and 80 on each car! Be careful with this part as some professionals have a tendency to blame this part because they are unable to find the exact failure. One defective sensor on your Ford Escape would be enough to put the blame on the ECU . Seek the advice of a second professional if you are ever asked to replace this part because it is expensive and not necessarily the cause for a Ford Escape to stall at start-up.

TDC sensor: Its part is to determine the speed at which your Ford Escape is operating so that the fuel is sent accordingly. It could be in poor condition, or simply dirty. Check its condition in order to draw conclusions and discover if this is the reason for your Ford Escape to stall at start-up.
Alternator: Logically, this one should be out of the question, because thanks to it the battery starts the car. However, it may be slightly damaged and the alternator may not be able to recharge the battery, which does not supply the car. It therefore is able to to light up but goes out just as quickly.

3: Conclusion on your Ford Escape

So here are the different parts that could affect your Ford Escape and make it stall at start-up. What you have to keep in mind is that it is important to make sure that the parts are right and clean on your Ford Escape. Then, do large-scale research on each part if necessary to really understand their usefulness and diagnosis. Do not hesitate to call on the advice of several professionals so that you do not rely on just one person.

In the event that you have any further questions about the Ford Escape, do not hesitate to consult our Ford Escape category.