You have no idea why your Chevrolet Colorado has been stalling on its own for no apparent reason? It gets annoying very quickly, specifically in the morning before leaving for work. In addition, this may eventually be a sign of a more sensitive problem than that. In this article, we will try to talk about the different potential causes so that you can identify and better understand it.
If this should happen at higher speeds, do not take any risks. Contact a professional.
First of all, ask yourself if you have changed your habits towards your gas station. Have you changed recently and is this matches with the failures you describe? This is unlikely to be the reason, but it has happened before that the fuel you take for your Chevrolet Colorado has been in contact with impurities or water, making the mixture much less appropriate with your engine. This remains a rather rare case.
If this is cleared of cause, let us look at the other potential causes, first of all of the electronic aspect.

stalls-by-itself-for-no-reasonchevrolet-colorado

1: Electronic cases for a Chevrolet Colorado that stalls

Your MCU box, which handles a large amount of calculations within your Chevrolet Colorado, may be malfunctioning, and as a result send incorrect data to your engine, making it unable to run properly. Another box, the BSI (Built-In System Interface). This one has a more complete purpose in your vehicle, as a centralizer of information sent by the various sensors of your Chevrolet Colorado. It plays the roles of administrator , safety system, diagnosis, driving assistance, etc.. Let’s compare it to an exchange and regulation platform, such as an airport control tower. These two boxes are vital for the proper functioning of your engine, so it is very important to monitor them for your Chevrolet Colorado.

Still on the electronic part, the alternator. This supplies electrical power to your motor. If this is insufficient, your engine may not run properly and stop.
Keep in mind that a simple deterioration of a wire, connection or component can have an impact on your entire Chevrolet Colorado.
Here is a non-exhaustive list of electronic causes that could cause you concern about your Chevrolet Colorado. From now on, let’s try to see the mechanical failures.

2: Mechanical causes on your Chevrolet Colorado

First of all, just think that dirty equipment can cause you problems when the solution is simple. Try to take a quick tour of your Chevrolet Colorado to see if everything is in good condition in terms of cleanliness. Example with a filter, pressure regulator or injection pump. Regular maintenance can considerably maximize the life of your vehicle.

After that, an vital part of your Chevrolet Colorado, the idle actuator. It regulates the engine speed of your Chevrolet Colorado, which must be in line with the speed at which you drive.
If he is unable to do his job without error, the engine will be impacted and consequently might stop if he considers that a risk appears.
Keep in mind that the causes of a Chevrolet Colorado that stalls by itself can be very simple (e. g. parts fouling) and that it is not necessarily required to call a garage because you may sometimes have to pay more than required for your Chevrolet Colorado’s breakdown. Be autonomous, at least to get an idea of what is happening, and as long as you consider that the failure is not manageable alone after numerous searches, then call on a professional.

To discover more tips on the Chevrolet Colorado, take a look at the Chevrolet Colorado category.