Your Chevrolet Cobalt slides and becomes uncontrollable inside a turn when you weren’t driving so fast? You don’t really understand where it comes from and you’ve been quite shocked.
In this article, we will try to describe the subject, and figure out all the potential causes that makes your Chevrolet Cobalt slip, but on top of that how to prevent getting caught up again and crash your Chevrolet Cobalt.

sliping carchevrolet-cobalt

Reasons that cause your Chevrolet Cobalt to slip

Wet soil and aquaplaning

The first thing to consider, even if it seems obvious, is the weather conditions. Once the ground is wet, and therefore covered with water, your Chevrolet Cobalt’s grip is completely altered And has a great chance to slip and loose control. You could easily do aquaplaning, which means the fact that your tire is no longer in direct contact with the ground, and therefore your Chevrolet Cobalt no longer has any grip. Your car will therefore start to take random, very dangerous directions.

Tire quality, wear, pressure

This aquaplaning phenomenon is clearly accentuated by various reasons. First, the make of your Chevrolet Cobalt’s tires. If you have purchased tires at an unbeatable price, it is most likely to be at the expense of quality. Be cautious with that, your lives are at stake. If there is anything you should be attentive about before buying, it is the tires. Talk to someone qualified or look at comparators on the Internet for your Chevrolet Cobalt because a bad quality tire could make your Chevrolet Cobalt to slip very easily.
Other than the quality of these tires, there is also their standard of wear. Even a tire of excellent quality wears out relatively quickly, count between 40,000 and 50,000 km. When you have worn tires, they become completely smooth and therefore lose all Chevrolet Cobalt’s grip on the ground.
Then comes the pressure from them. Indeed, an under-inflated tire also contributes to aqua-planning (we are talking about aquaplnning here but this does not only concern water, but any slippery ground, water, oil, gasoline etc…). Remember to check the pressure of these on a regular basis, especially on the eve of a long journey. The advised pressure is often written on it, otherwise you can look on the internet by filling in your Chevrolet Cobalt’s model.

Vehicle load and driving behaviour

It is also important to take into account the load of the vehicle. If your safe is overloaded, your Chevrolet Cobalt will be much harder to control and therefore slip easily. Pay attention to that, and that brings us to the most important point to consider, your driving style.
If you drive fast, it makes sense to reduce your grip on the ground. When turning, do not accelerate. Of course, avoid wet areas, especially on the side of the road.
Imagine that you came too fast in the bend, when you start to lose control and start to slip, avoid braking at all costs. This would cause you to permanently lose control of the vehicle.
If your car is leaving from the front, it is advisable to stay on course and wait until you find some grip.
If, on the other hand, you were to start making a tailspin, try to counter-direct your Chevrolet Cobalt in the right direction.
Of course it is easier said than done, but it is still better to know that than nothing at all!


The main point to remember is that your Chevrolet Cobalt’s brake is your adversary in this situation, examine the condition of your Chevrolet Cobalt often, don’t drive too fast, especially in corners, and if this takes place anyway, try to stay calm and just decelerate to restore controllable speed and grip the road again.

If you need more tutorials on the Chevrolet Cobalt, go to our Chevrolet Cobalt category.